Forced Induction and SwapsPost information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
I mocked up my turbo and all my IC piping the other day so I could start making an intake tube. The lower radiator hose is very close to the compressor inlet, though. I was just curious how everyone was addressing this problem or if anyone had any insight. I was thinking about just buying a longer radiator hose. If nothing else, I will just run some flexible hose from the compressor to a filter but I would really rather have some hard piping.
To remove this ad, register today for free or log in if already registered!
__________________ Turbo 01 LX 199.5 HP 195.5 Ft-Lbs of torque at 8 psi
Sold
Current: 2006 350Z
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
