Forced Induction and SwapsPost information/questions about Forced Induction methods (Turbos & Nitrous Oxide) and swaps here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
Honestly, the best way to get ahold of them is e-mail.........i highly suggest getting the nutrod from them b/c it will be a bitch making one exact.
I don't have the rod in front of me, but i went out to the car and tried to measure it the best i could. It uses 13mm bolts and from center of bolt head to center of bolt head is 7"
As far as vaccum lines, i used 0.4mm hose or u can use 1/4" hose.
__________________ The 2nd Amendment America's original homeland security
'01 Civic EX -- boosted
'99 Chevy 2500 Ext. cab 4x4 with a
454 <--- under 10 mpg
'02 Chevy Trailblazer
just use some zipties...but use the ones that are the same color as your hose so that it all looks nice...that is what i have done, and i have never had a problem with them..
__________________ SRT4 w/ built motor/head/tranny/ams spec37r+35lbs of boost/aem ems/1300cc injectors plus nitrous...Coming to a town near you March 07
just use some zipties...but use the ones that are the same color as your hose so that it all looks nice...that is what i have done, and i have never had a problem with them..
yeah, zipties work great
__________________ The 2nd Amendment America's original homeland security
'01 Civic EX -- boosted
'99 Chevy 2500 Ext. cab 4x4 with a
454 <--- under 10 mpg
'02 Chevy Trailblazer
Picking up some missing SF Turbo parts, need some specs 
