BigHippo22

iTrader: (1)

Is there anyone who has done the swap who would be willing to write up a detailed DIY for the wiring? I am about to order the ETM for the civic and rsx, but if anyone would be willing to help me out, i would like to avoid buying the books. If no one comes through, i'll write up a nice DIY for the swap, It's all apart in my garage right now, and i'm just getting into the "put it back together" stage, so it should be done in a couple weeks, only because i'm ultra slow! ! ! Thanks anyone who can help!

Hawk

iTrader: (5)

want a diy for the wiring?

call hasport or go to there website www.hasport.com and tell them you need a wiring harness for a k20 swap in a 02 civic. Trust me you don't want the headache of figuring it out yourself.

BigHippo22

iTrader: (1)

how much does the conversion harness cost??? I was also thinking about swapping the entire harness. I have my dashboard and complete interior out, so i was thinking if i swap the gauge cluster and the heat/ac controls, i would be able to use all the RSX stuff.....i didn't look at it too carefully yet because its a big pain to take the old civic harness out, if i'm just going to end up putting it back in....

BigHippo22

iTrader: (1)

I called HASport, and their conversion harness is $300 with a 2 week turn around time. I haven't decided if I want to go this route yet though...i might go through the hassle of figguring it out myself, if i do that, I will gladly keep track of everything I do in order to write up a DIY.

Hawk

iTrader: (5)

if you can figure it out then props to you man. We had test lights, computers wiring diagrams, we just couldn't get everything sorted out on mine. It cranked got fuel but no spark.

But hey if you can figure it out, then i guess your car will be DIY then mine

Em2Guy

iTrader: (4)

its not that hard to figure out geez:-P