Window Roll Up

EM2Evolution · 12-29-2002

Anyone installed a window roll up module to their aftermarket alarm system. Im lookin to buy one so that all I have to do is arm the alarm and the windows roll up automatically. Any DIY's for it or any help would be appreciated..will the universal modules work or do I have to buy one from the manufacture of my alarm. Thanks for the help.

To remove this ad, register today for free or log in if already registered!

ohmysac · 12-29-2002

you could make one with a capacitor and a relay...ask over at the12volt.com

2k2civic · 12-30-2002

You can get one off ebay for about $20 ($30 if it's a four door). Wiring it up is pretty easy. The unit gets its signal from the alrm brain (one wire), and then it pretty much intercepts the wiring going from the window switch to each motor and needs a ground and 12v. Check out the wiring diagram here.

AlpineCivic · 12-30-2002

"You get what you pay for" I have an Alpine alarm with DEI window roll up modules. One rolls my windows up and down the other does my sun roof, They can be added to any alarm and they work great!!!