[DDragon7]

Yeah, keep those screws off, you dont need them. They only create a problem when its time for you to change your brakes.

[gearbox]

some pics of fog retro. its easy just buy bmw aftermarket projector fogs on ebay and reuse the oem trim pieces. and use oem screws and some wire ties.

[drunkenmagnum]

can you make me something like this? (R8 light mod)

http://www.cincitydesigns.com/

were would you get the materials ( the light bar) at?

[gearbox]

the problem with putting led in the headlight is it will not last very long due to heat issues. most of those designs they did are for show only. they have driving light led bars already that can substitute headlights, just search for xmitter bar.

http://www.visionxoffroad.com/products/led/xmitterbar/

if you want basic show led components for sticking somewhere, check besthongkong.com light bars you can cut to size. they are pretty nice.

[firetyphoon1]

hey gearbox just wondering how do i get off my passenger fender? i know theres 2 bolt screws under the hood and i think just one behind the door am i supposed to take the door off or something? Andd will a 2002 Coupe fender fit my 01 Sedan??

[gearbox]

you should be able to get it off without removing the door, there are also some hidden plastic clips holding it on. most of mine broke from being old and fell down inside lol. so they should be easy to break. i also think youre gonna have to take the bumper off, and possibly the headlamps, since theres a fender bolt somewhere in there either shared with the headlamp or next to it.

[firetyphoon1]

Ohh no wonder I didnt take out the bumper n headlight,, but do you know if a 2002 passenger fender will fit my 01 sedan?? I think it does but not 100% certain?

[bryantiscool]

Originally Posted by gearbox

you should be able to get it off without removing the door, there are also some hidden plastic clips holding it on. most of mine broke from being old and fell down inside lol. so they should be easy to break. i also think youre gonna have to take the bumper off, and possibly the headlamps, since theres a fender bolt somewhere in there either shared with the headlamp or next to it.

theres a bolt next to the door and one under where the pinch weld is
you need to unscrew the plastic bracket where the front bumper clicks into and pull that bracket off
then the 2 up top where the hood closes
2 screws at the bottom of the fender lining

that SHOULD be all the screws
ALSO, take off the plastic holes that are on the old fender and put them into the new one
EX: the 2 bolts up top have plastic clips and the 2 screws at the bottom of the fender lining have plastic clips
dont think i forgot any, but you should take off the front bumper and headlights so that the new fender wont get scratched or scratch the headlights
did mine yesterday but didnt pay attention much

[gearbox]

does anyone know if fender from coupe and sedan are same? passwordjdm says its different. ill check www.hondaautomotiveparts.com later for the part numbers.

[bryantiscool]

Originally Posted by gearbox

does anyone know if fender from coupe and sedan are same? passwordjdm says its different. ill check www.hondaautomotiveparts.com later for the part numbers.

they seem the same
cant think of what would be different
maybe mounting holes?

[firetyphoon1]

ok I thought the same but i was just being sure, cuz this guy down in NC said he got a New Honda factory primed passenger fender for $70 for a coupe i was just checking if it would fit, i dont like buying things and then it doesnt work

[VicBNimble]

Gear, I have searched all over the suspension threads and haven't found an answer to my question, maybe you know... Does an 05 LX Special Edition coupe come with a factory rear sway?

[02BLKCIVIC]

my guess is no^ because its an LX.

just a guess though, why dont you just look?

[sniperscout]

Originally Posted by 02BLKCIVIC

why dont you just look?

that is a very wise answer

vicbnimble...do you know what a rear sway looks like and where it is located?

[gearbox]

lol its the black bar in the rear of the car with the curve in it, goes across from one side to the other over the muffler. just look cause ihni. its right below the evap air filter