E-Manage FAQ!!!!!!!!! - Page 2

HyaBoosta · 01-05-2005

so i would only install the injc. 1-4 wires and the ground right? Oh and what is the other harness that is smaller and clips next to the main one. thats the ingnition harness right? I know im not crazy but I have a felling my wire colors are a little different. Can anyone find a manuel that comes with the greddy turbo kit. I think the wires are coded a little different. and I also have this small box with a green, white, and black wires coming from it. I'll take pics tonight. I know this is coded different.

To remove this ad, register today for free or log in if already registered!

TheSmuggler · 01-05-2005

I can barely read... I have ADHD, I can't soldier worth a crap (hands arn't steady enough) and following directions.. well lets just say I treid to build my legos w/o instructions first lol =)

HyaBoosta · 01-05-2005

It seems the greddy website Owns me. and I found the info there.But I found something out. I don;t have some of the wires you guys have. There are no vtec wires in the main harness so I guess vtec can't be adjusted which I prob wouldn't have used anyway. But I also don't have the purple VTM wire. what does that wire do?

dezod · 01-05-2005

Quote:

Originally Posted by HyaBoosta

It seems the greddy website Owns me. and I found the info there.But I found something out. I don;t have some of the wires you guys have. There are no vtec wires in the main harness so I guess vtec can't be adjusted which I prob wouldn't have used anyway. But I also don't have the purple VTM wire. what does that wire do?

Goes with VTEC

HyaBoosta · 01-05-2005

got the main harness on but the active LED is flashing red. how do I read what code the emanage is putting out?

dezod · 01-05-2005

Quote:

Originally Posted by HyaBoosta

got the main harness on but the active LED is flashing red. how do I read what code the emanage is putting out?

support tool

HyaBoosta · 01-05-2005

ok I have the support tool and my harness has no vtec wires connected or no VTM wire. But now my car starts to stall out and won't rev past 4k. any ideas?everything was ok till I updated the main unit,
oh BTW the active led is flashing from green to yellow to red over and over.

abmerop18 · 01-05-2005

^ mine did the same exact thing. it was because it was not tuned. you also have to reset your ECU by following the instructions in the DIY Intake page.

abmerop18 · 01-06-2005

so if we do not have vtec, we set the rotary settings to 4-8-C, correct?

dezod · 01-06-2005

Quote:

Originally Posted by abmerop18

so if we do not have vtec, we set the rotary settings to 4-8-C, correct?

That is what I am using.

TheSmuggler · 01-06-2005

^but you have v-tec D

dezod · 01-06-2005

Quote:

Originally Posted by TheSmuggler

^but you have v-tec D

correct.

HyaBoosta · 01-06-2005

the vtec doesn't seem to be working on our cars so everyone is using the 4-8-c.
what does it mean if the active led glows from green to yellow to red?

dezod · 01-06-2005

Quote:

Originally Posted by HyaBoosta

the vtec doesn't seem to be working on our cars so everyone is using the 4-8-c.
what does it mean if the active led glows from green to yellow to red?

yellow means modifing the signal and working correctly.

red means an error

This is if I recall correctly

VTEC remains untouched. No wires tapped or anything. Therefore, it still works......It engages. Diagnostics and dynos show it for me.

HyaBoosta · 01-06-2005

but do you know what it means when the led flashes from green to yellow to red over and over again the whole time?