Honda Civic DIYs and Civic Tech ChatHonda Civic DIYs and Civic Tech Chat - for the true gearheads! Bring your wrench, it's time for some Honda Civic DIY projects! Questions about problems with your car do NOT go here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
I did it last night and had the same confusion you did.
The DIY is refering to the bottom latch above the rear bumper - not on the trunk lid it self.
You need a little muscle to take the black plastic covering off (approx 2 feet long).
I pryed my fingers under the top right corner and just pulled slowly but firmly and it came off.
Unscrew the two 10mm screws and move the latch down (It will be able slide about 1/2" up or down)
I found that if I had it all the way down my trunk couldn't close.
I set it at about 4mm before maximum slide down.
Getting my subs next week so let's see if it works.
Did this today on my 02... If you look real close at the latch and the body you will see alignment marks (3 of them) mine was on the top one when i started i could push the trunk and it had some play, i moved it to the bottom mark and the latch didnt catch. I ended up moving it to the middle mark and it closed tightly and there was no more play.
I'm going to ty that too. my trunk rattles like an s.o.b. I have dynamat all over the ish, but when the bass goes up the rattles get annoying if I'm standing outside of the car
I did what you suggested. All I had to do was loosen those rubber things about two or three rings and no more trunk rattle. It all depends on where people are having problems. For me It was with the trunk rattling against the bumper. I already have a ish load of dynamat xtream and original. For the people that don't they might want to go ahead and get some. The choices are between dynamat raamat and b-quite. IT's all the same ish so it doesn't matter
That stops the trunk from rattling. Now for the rear deck [IMG]i/expressions/face-icon-small-smile.gif[/IMG].. Remove the rear deck. Add 1 sheet of 1/4" FOam padding. Cut holes as needed for the clips. put rear deck back on.....Done. If anyone ever has any questions on deadenign thier car..PM Me... I've spent the last 4 months making my car as dead as can be.