You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
we used to meet up at the orlando air port, you pay for parking on an hourly basis, not too bad but if you go up on the roof you got a good spot to meet and theres plenty of airplane noise so you don't disturb people, usually you get no cop presence either, everyone minds their own.
To remove this ad, register today for free or log in if already registered!
__________________ B16 10.4:1 JDM Pistons ITR Manifold 70.2mm Throttle Body Skunk2 Stage 1 Pro Cams AEM FPR DC Header Magnaflow Custom 2.5" exhaust BDL Fuel Rail Nology Individually Grounded Wires Fidanza 7.5lb Flywheel Exedy Clutch Goodridge Braided Steel Clutch Line Fidanza Short Shifter Skunk2 knob JUN Chip
IM SO JDM I EVEN HAVE SARS
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
If you know anyone with a clean EF or DA, there's a meet in Tampa August 16th. BBQ, food will cost about $5, prizes will be given out. I *should* be there.
Won't have my car for a good month and a half after that though, going in for paint.
Speaking of which, know anyone in the area that does good paint and body work?
__________________ 1991 Honda CRX DX Ebay Intake -- Fart Can Muffler -- White Rota Slips
Beat to Hell Front Fenders -- Rusty Roof/Hatch Area
i hate to say it but the maaco on north main does really great work if you get the base/clear. They use dupont bases clears and paints. They have a display car that they did a base/clear with three clears on it and it's clean man. I'm sure there are other shops that can do it but i haven't seen any that can beat maaco for the price.
__________________ B16 10.4:1 JDM Pistons ITR Manifold 70.2mm Throttle Body Skunk2 Stage 1 Pro Cams AEM FPR DC Header Magnaflow Custom 2.5" exhaust BDL Fuel Rail Nology Individually Grounded Wires Fidanza 7.5lb Flywheel Exedy Clutch Goodridge Braided Steel Clutch Line Fidanza Short Shifter Skunk2 knob JUN Chip
i hate to say it but the maaco on north main does really great work if you get the base/clear. They use dupont bases clears and paints. They have a display car that they did a base/clear with three clears on it and it's clean man. I'm sure there are other shops that can do it but i haven't seen any that can beat maaco for the price.
Do they do legit prep work or just spray over everything?
__________________ 1991 Honda CRX DX Ebay Intake -- Fart Can Muffler -- White Rota Slips
Beat to Hell Front Fenders -- Rusty Roof/Hatch Area
Do they do legit prep work or just spray over everything?
it all depends on what you want to pay for. They can sand down to the primer or go all the way to the metal. It's your dime so they'll do whatever you are prepared to pay for. They'll mask windows exhausts and paint door jambs etc. Check them out though, it can't hurt to see what they got.
__________________ B16 10.4:1 JDM Pistons ITR Manifold 70.2mm Throttle Body Skunk2 Stage 1 Pro Cams AEM FPR DC Header Magnaflow Custom 2.5" exhaust BDL Fuel Rail Nology Individually Grounded Wires Fidanza 7.5lb Flywheel Exedy Clutch Goodridge Braided Steel Clutch Line Fidanza Short Shifter Skunk2 knob JUN Chip
Yep. As the title says, im looking for at least 10-15 drivers out there in Florida to meet up and have a dyno day at CFT. They offer baseline and full tuning services for hondata/apexi/fields/aem units. I'm going for a baseline pull to see where I'm at power wise. Need to have at least 10 no more than 15 per group, we get special pricing and discounts on dyno pulls AND tuning.
DYNO RATES
*Please add $25 for Wide Band O2 meter.
Baseline Session
We will make two consecutive runs to establish a base line for HP & torque.
You will receive a print out of these runs.
- 3 AWD dyno pulls $75
- 3 FWD/RWD dyno pulls $50
*Additional charges may apply for vehicles that require extra work or modifications in order to be dyno-tested
1 Hour Session
We will make various runs while you can tune yourself.
You will receive a print out of these runs.
- 2WD $75
- 4WD $125
CFT DYNO TUNING
- All CFT dyno tuning packages include Dyno time & Tuning.
- We will tune your car using full capabilities of our equipment.
- Includes Wide Band O2.
- You will receive a print out of the base and final runs.
- Call for Pricing.
DYNO DAYS/CLUB DAYS
- We require a minimum of 10 cars, maximum of 15.
- Printouts will be given.
- We can provide our tuning services if requested at additional costs.
*Call for pricing.
DYNO TUNING TIME IS AVAILABLE BY APPOINTMENT ONLY!!!
I know you people are out there so let's get something going.
__________________ B16 10.4:1 JDM Pistons ITR Manifold 70.2mm Throttle Body Skunk2 Stage 1 Pro Cams AEM FPR DC Header Magnaflow Custom 2.5" exhaust BDL Fuel Rail Nology Individually Grounded Wires Fidanza 7.5lb Flywheel Exedy Clutch Goodridge Braided Steel Clutch Line Fidanza Short Shifter Skunk2 knob JUN Chip
