Honda Civic Racing, Street Encounters and Competition RacingHonda Civic Racing happens on the street and on the track. There are different setups needed if you are using your Honda Civic for drifting, drag racing, or track racing. Share your stories of Honda Civic racing here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
All the details to my cars setup are in my profile. Launch was between 4000-5000 RPM.
PM me if you have anymore questions. I am out of the country right now, but I do have access to computers most of the time.
damn u were launching HIGH...I think I launched from 3000-3500...I TRY to take under 3500rpms b/c I hit full boost around 3600rpms and that = MADDDDD TIRE SPIN and SHITTY 60'
To remove this ad, register today for free or log in if already registered!
__________________ STAFFORD FABRICATIONS
14.2@100.81 on STREET TIRES AND 8PSI SO FAR AND UNTUNED...
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
Well my car kept bogging below 4000 and with the DR's I thought they would just stick, but they were still spinning just not as bad as the stockies. I think I was over heating them. If only had more practice with them I could have got a 1.9 60 ft and maybe a 14.9. I'm thinking about getting some slicks, but I don't know if everything could handle a 4-5k launch with instant grip. If I don't spray in 1st gear I may be ok.
You should def. get some DR's. I'd also recommend some light weight wheels. The stock steelies are heavy, especially the 15's on the EX. I'm looking at these Kosei K-1 TS. 14"x6 only 9.2lbs for $120 a piece. http://www.tirerack.com/images/wheel...1_ts_ci3_l.jpg
redline: you should really think about getting a cold air intake ...
Instead of buying a new one I'm gonna continue with my extension through the headlight Idea when I get back. I have most of the materials back at the house, but I wish I could find a cheap headlight from the junkyard just in case I screw up. If I could only just pop the light out at the track without having to remove the bumper I would do that. Damn you Honda!
changed my setup around..
got rid of 2.25inch exhuast and making a striaght 3 inch leaving the right side of car and running 12lbs of boost tuned on uberdate...
will be about 355whp....
should be close to 11's on my buddies drags....
wish me luck again!!!
__________________ 95 civic ex, jdm b18c, lsd tranny, turbonectics wastegate, stageIII blow off valve, garrett sc61 t3/t04e .63 a/r 60 trim turbo, enkie 17's, progress and tokico suspension http://c.myspace.com/00064/79/57/64377597_m.jpg
CAR for sale..