Honda Civic Member's RidesHonda Civic Member's Rides - Want to show off your Honda Civic mods? Need help deciding what Civic part, mod, or even what version Honda Civic to buy? Anything and everything about your very own Honda Civic member's ride goes here.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
I did the poor mans resurface on my flywheel because we were hurrying through the clutch install after work. I ended up with alot of clutch judder It may look smooth but when under pressure I'm sure it's like a mountain range ^^^^^^^^^
To remove this ad, register today for free or log in if already registered!
__________________ Its one thing to know your car is slow. Its another to take it to a track, and get it in writing, in front of 200 people, that your car is REALLY slow - Ashole (Gotta agree 17.2)
193WHP & 166 ft lbs @ 9 psi (GReddy Emanaged Beotch)
Dezod V3 kit w/ Tial Blow off Valve & Wastegate
Hondata Managed & SRT4 Injectors (waiting to dyno still...)
75mm Throttle Body
Dezod 2.5" Back to 3" Vibrant w/ Resonator
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
LOL - tks folks. I ordered the bearings Sunday night, so hopefully they'll be in my PO box on Monday. I don't fly back home until Friday night and my post office isn't open on weekends.
__________________
Quote:
Originally Posted by LogicWavelength
This thread (T.E.A.R.S.) was inspired by speedfoos. We all know about his very public and very obscene battle against his car's engine.
There's a good chance that I'm not going to answer your PM.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
nice clint...tommrow i ecu goes out for kpro, and i get all my new control arm bushes and motor mounts this week...woot...next up for next week, aem peak and hold box with new injectors.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
OK, back from Germany - one flight cancellation, two delays and a day later than I wanted to be, but I am back.
Bearings aren't here yet so I started putting the car back together a little. Axles are back in and knuckles re-assembled. Tranny fluid topped off - I tell ya. Easiest way to fill the tranny fluid is to pull the VSS sensor off the top of the tranny and dump the fluid in there. Sure beats a pump a funnel and line setup to get it in the filler hole on the side of the tranny.
One of the things my old CRX had that this Civic doesn't is a removable central radiator support. Which is stupid. It's a lot easier to get stuff in and out, if it's removable. It made me do this to my old one when I was getting the turbo to fit.
All crappified, rivets (my addition), electrical tape to keep the water lines from getting cut on the edges. Stupid.
I had some extra 1" conduit tubing and made a removable one instead! Much better as I can pop this one in and out with two bolts. And what's even better is that it clears both the radiator and hood latch. I didn't even measure it!
__________________
Quote:
Originally Posted by LogicWavelength
This thread (T.E.A.R.S.) was inspired by speedfoos. We all know about his very public and very obscene battle against his car's engine.
There's a good chance that I'm not going to answer your PM.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
Haven't even ordered bushings yet man. Bearings should be here by Monday though. Oh and since I just got home this morning and the temp is decent, I should be able to respray the VC tomorrow Adam.
__________________
Quote:
Originally Posted by LogicWavelength
This thread (T.E.A.R.S.) was inspired by speedfoos. We all know about his very public and very obscene battle against his car's engine.
There's a good chance that I'm not going to answer your PM.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
Damn, Speedfoos. I leave England for a while and you go and blow a bearing! That's some crazy shit. I wish I was able to help out. I should be back in April. If you need a hand hit me up. Also, things are going great with shipping my car and I should be dropping it off at the port in about a week.
Re: FUBAR'd Main Bearing FTMFW!!! - (Pg. 144) - The Speedfoos' Turbo Thread!!
Yeah, it's uber rainy, windy and shitty out today Adam, so no paint. First nice day we have and I'll finish it out and clear it too since it's taking so long. I don't even want to go outside.
Good deal on shipping the car Scott! I go on a 90-day TDY starting 26 March so we'll have to play with your car when I get back. Header and catback are still yours if you want them. Cheap.
__________________
Quote:
Originally Posted by LogicWavelength
This thread (T.E.A.R.S.) was inspired by speedfoos. We all know about his very public and very obscene battle against his car's engine.
There's a good chance that I'm not going to answer your PM.
It may look smooth but when under pressure I'm sure it's like a mountain range ^^^^^^^^^ 
(GReddy Emanaged Beotch)
