[sl33pyriceboi]

^yea man seriously......thx to this thread i have a cool cluster

[sethro]

Anyone know where us Canadians can find a KM/h cluster... I would sooo love to do this mod

[JDM22]

Hi guys! I really need help! Ive read the entire topic, and ive found some information that help me ! BUT , I still need your help! Because, ive got a 01 Civic DX Coupe CANADIAN, First, My ABS Light is on, I want to know, if I retire the Bue/Red wire, does is will put off the ABS light indicator? And I want to know Where the White/Blue( DRL Modul) and the Pink ( Washer Fluid) in the green connectors Goes?! Thanks you very much guys!!!

[01HonderCivic]

What car did you get the cluster from? IIRC if you have a non ABS car and you got it from a car that did have ABS, then the ABS light will be on because there is no signal and it thinks there's a system malfunction. *shrug*

I will check my manual to see if it mentions anything about the DRL and washer fluid. Unfortunately not familiar with Canadian model Civics.

[gearbox]

your dx does not have abs, i guess the new cluster you got does. if you want the light to go off, i think you can just ground the abs wire to the chassis. BUT im not totally sure on this. if that doesnt work, you may need to apply 12v power to it. again, just guessing. if something blows up, dont blame me. just ideas. heres the green plug diagram...

for the wht/blu drl wire, it needs to go to pin 13 of the green plug.

for the washer fluid, your pnk wire would have to go to pin 10 in the green plug.

[JDM22]

Wow! Thank you very much! I really appricate your help!! I will test it today! I will give you news back!

[JDM22]

Hey guys! I still need your help! Ive done what youve said to me. So, my DRL is on! But, my DRL Light goes on in my cluster, but, my lights dosent open!! They dont work... I dont know why :S Ive did a reset with the battery... Ive plug the Pink Wire for the winshield washer, AND, the light dosent goes on when I put the key ON.... Maybe the wires is not in the good spot? And, for the ABS light, ive try to get ou the wire of the connector, it dosent work, ive try to ground it, dosent work... so, I dont know.. Can you help me please?

And I want to know, does your Gaz gauges is working properly?! Mines dont tell me the good gaz level.. Ive just fuled up my tank , the tank is fullll of gaz, and my gaz gauge indicate me that I am to the 3-4 of the tank... Wtf!? :S

[JDM22]

Hey, I need to specificate something, The problem with my DRL, is not like the most comon one, that all the light in the dash are fucked, and we heard sont noisy sound... Mines, are just dont lighting!! Maybe a Fuse or something? A reset?

[gearbox]

idk, i didnt think the gauges had anything to do with the drl actually coming on in the headlight but maybe. thats where the service book shows me for those two wires so im not sure what else to try. you could check all the fuse by the battery just in case. try that first. the gas gauge, idk. either it works or stays at the bottom on E. so if its above E, it may be a problem with the gauge itself. i know alot of them the gas and temp gauges break easily and wont work right for some reason.

[JDM22]

OK.. Because, before I connect de DRL wire to the cluster, my DRL were not working, When Ive pluged the DRL wire into the Cluster, the DRL signal just come on, BUT, the DRL lights dont light up!!! I dont heard noisy sound or anything else.. when I open my lights, the DRL signal goes Off... I really dont know, ive check up all the fuse, and its all okay... Under the dash its okay...

[BoneStOck_176]

amazing...does n e one have a thread on how to change the bulbs that light the cluster.. i saw someone do it in orange.. on sum type-r shxt and i wanna try!!!

[m3gach33zy]

alright guys I just got the cluster yesterday and I've been looking over the wiring charts. I have an 05 DX VP swapping to the 03-05 nice red cluster with tach . I'm just a little confused here about people saying that you have to splice the yellow/black wire. I'm not sure what wire your supposed to tap into? I was looking at the charts and the only wires that I couldn't find a spot for are the blue/red and blue/yellow that are on the green connector. are they supposed to just be taped off and not used at all? or am I going crazy here. I understand that some of the blue connector wires need to go over to the green one but I just don't see a spot for those 2 wires.

[m3gach33zy]

okay wow nvm I think I just figured it out! That second chart I just found is so much more easier to understand! I'll put up some pics of my progress.

[m3gach33zy]

okay guys wtf how come the bezel doesn't come out after i unscrew the 2 screws holding it in?? I can't get the damn thing over the steering column thing for some reason and I cant see anything that is holding it down. I have an 05 dx btw.

[D5cIvIc]

uhh...there should be 3 screws holding it in...1 ontop in the middle and 2 on the bottom (left and right)

lower your steering wheel all the way down to get it out.

man...if you can't get the cluster out of the car, then how are you going to even repin it...