Inner Tie Rod End Removal
#1
Registered!!
Thread Starter
Join Date: Jun 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Inner Tie Rod End Removal
It seems 7th gen civics have longer inner tie rod ends than most cars so all the inner tie rod end pipe style tools I used are too short.. Any recommendations?
Somebody recommended the Lisle 45750 but it also looks to short..
Thanks!
Somebody recommended the Lisle 45750 but it also looks to short..
Thanks!
#2
If you think a good mechanic is expensive, try hiring a bad one
Re: Inner Tie Rod End Removal
Service manual shows using 2 Crescent wrenches (one on tie rod, one on center mount)-----AFTER the rack is out of the car. It doesn't tell how to remove them while the rack is still mounted in the car. I'd think you could figure out the wrench size needed for the tie rod and then locate a Crowsfoot to use with a long extension. This one looks interesting I hope all these pics post ok....
#3
Re: Inner Tie Rod End Removal
Service manual shows using 2 Crescent wrenches (one on tie rod, one on center mount)-----AFTER the rack is out of the car. It doesn't tell how to remove them while the rack is still mounted in the car. I'd think you could figure out the wrench size needed for the tie rod and then locate a Crowsfoot to use with a long extension. This one looks interesting I hope all these pics post ok....
#4
If you think a good mechanic is expensive, try hiring a bad one
Re: Inner Tie Rod End Removal
Hey ya'll, I found this posted on another forum
http://www.autozone.com/autozone/accessories/OEM-Inner-tie-rod-tool/_/N-26l8?itemIdentifier=94645_0_0_
http://www.autozone.com/autozone/accessories/OEM-Inner-tie-rod-tool/_/N-26l8?itemIdentifier=94645_0_0_
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
hans.pcguy
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
07-12-2015 12:19 PM
mrohitredd
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
05-28-2015 10:03 AM
pheaton
7th Generation Civic 2001 - 2005
2
05-04-2015 08:26 PM