bump, i forgot the size, but its clearly printed on the stock bushing. the problem tho is that the stock one is not a normal bushing shape like the rear. it has a different design. so idk if its possible to cut chunks out of the ES bushing to mod it in there or if i should just get new oem bushings to replace the cracked ones.
I can check my 01 bar size if that helps you. I still got the OEM bushings- took the bar off, sitting in the attic. Hit me up if you want me to dig em up and grab whatever numbers u need off them.
well thats not the problem, i found the size on the side of the bushing. problem is weird shape. its not flat on the bottom is rounded off on each side.
maybe its to give it some sideways movement.
but i am not sure, i just dont realy see a problem.Its gets mounted agains a flat side so.
If i allready had my energysuspions ones(04-05 TSX type are 25.4mm) i could tell you if they are flat.
I swapped my 15.4mm to 25.4mm but still with
Oem bushing and yes they are rounded.
