Neuspeed upper Front Strut Bar! HELP!

aznsensation18 · 03-01-2004

I have a 03 EX manual. I just installed the Neuspeed strut bar and had to relocate the clutch resovoir if thats the right thing that was in the way. I was wondering where did you guys relocate that part? Did you just zip tie it like i did. Will cause any problems? Let me know please.

To remove this ad, register today for free or log in if already registered!

Boilermaker1 · 03-01-2004

All you have to do is bend the bracket forward a little. Why'd you move it?

aznsensation18 · 03-01-2004

It was in the way of the front bar so i moved it. You mean unscrew the bolt holding the bracket and move it forward?

PunkingCivic · 03-01-2004

no grab it and push it toward the front of the car.
You just need to bend it a little for clearence of the bar
I have a 1/8" clearence from the bar and have no problems.

see look at boilermakers bar:

aznsensation18 · 03-01-2004

ok....coo coo...so i wont just snap? knowing my luck i would just snap the damn thing....i will give it a try.

SlammedBlueEM2 · 03-11-2004

Worked for me. That's what the instructions with the bar say do.

Yoyoio · 03-12-2004

or move it down. If you unscrew the bracket, you'll see there's another hole below the exsisting bracket hole. Than you can mount everything down an inch (thatz how i did mine)

aznsensation18 · 03-12-2004

ok...i did it already...like a week ago thanks for yallz help...it was to easy

spencerkam · 03-13-2004

i moved mine down to the next lower hole as well.

SK-EL · 03-13-2004

Thanks for the info on the bend..