[yeroks]

Originally Posted by jackburton

Could you or better yet would you by any chance list the respective part numbers?
Would be much appreciated.

CRANK SEAL...........91212-PLM-A01
TIMING BELT..........14400-PMM-A02
CAM SEAL..............91213-P2F-A01
TENSIONER SET......04145-PLC-315
WATER PUMP..........19200-PLM-A01
P.S. BELT..............56992-PLM-003
A/C BELT................38920-PLR-003

GASKET SET, HEAD COVER (Don't have the part number but here is a link to it on Majestic

http://www.hondaautomotiveparts.com/...DER+HEAD+COVER

Don't forget some of those plastic bumper clips for the ones that are all scraped up on the splash shield.

[khmer]

I finished the install today. It took me 2 weeks because I broke the pulley and had to order a new one. I also did a valve adjustment, but it is much noisier. It makes a sputters sound at 2nd gear and 3rd gear. Did I mess up the timing or did I really messed up the valve adjustment. I'm thinking about taking it in to a mechanic to do a valve adjustment. How much would that cost?

[khmer]

Originally Posted by khmer

I finished the install today. It took me 2 weeks because I broke the pulley and had to order a new one. I also did a valve adjustment, but it is much noisier. It makes a sputters sound at 2nd gear and 3rd gear. Did I mess up the timing or did I really messed up the valve adjustment. I'm thinking about taking it in to a mechanic to do a valve adjustment. How much would that cost?

I redid the valve adjustment and it was much quitter. Everything was at tdc. so I think the noise on 2nd gear, from 2000-3000rpm is from an exhaust leak from the engine?

[Cleft_Asunder]

Super DIY! I'm very impressed. I like the video showing proper use of the power built tool. You don't even have to remove the bumper! Fucking ay.

[Fox04coupe]

how much do mechanics charge to do this?

[raj]

I know this is an old post. Hope you still reply. What year was your Civic? What crank holder tool did you buy? The OTC or Powerbuilt?