Canada East Manitoba, Ontario, Quebec, New Brunswick, PEI, Nova Scotia, Newfoundland
Welcome to civicforums.com!
Welcome to
civicforums.com .
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community,
at no cost , you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please
join civicforums.com today !
#1 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
Hayame Coilover
what version is this? To remove this ad, register today for free or log in if already registered!
__________________
JDM
Last edited by jdm_bb; 10-11-2004 at 11:52 AM .
Sponsored Links To avoid seeing this ad in our forum please register
#2 permalink Post Master General
Join Date: Feb 2002
Location: Scarborough, Ontario
Age: 27
Posts: 5,364
947603746043?
#3 permalink Ultimate Member
Join Date: Oct 2002
Location: Ontario
Age: 25
Posts: 2,884
huh?
#4 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
the picture is really bad, but can anyone tell if this is version 1 or 2?
__________________
JDM
#5 permalink Ultimate Member
Join Date: Sep 2001
Location: mississauga, Other, ZEBRA
Posts: 2,245
i think thats version 1
__________________
#6 permalink Ultimate Member
Join Date: Oct 2002
Location: Ontario
Age: 25
Posts: 2,884
i think its v1 too cuz mine is the same
#7 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
blkcivic:do u have any problem with yours?
__________________
JDM
#8 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
how much do you guys think this is worth?
__________________
JDM
#9 permalink Ultimate Member
Join Date: Oct 2002
Location: Ontario
Age: 25
Posts: 2,884
no not much problem, but the rear doesn't go as low as they advertise... mine it the lowest and i have no gap, but doesn't tuck.... got mine for 900 from the states
#10 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
with this set up do u think i can tuck if i use 195/55/15
__________________
JDM
#11 permalink Yes, it's an Acura EL
Join Date: Dec 2002
Location: 416-905, Ontario, Canada
Age: 32
Posts: 8,282
In front, for sure. In rear, at least very close, but I wouldn't be surprised if the top of the tire was just grazing the wheelwell.
#12 permalink Ultimate Member
Join Date: Sep 2001
Location: mississauga, Other, ZEBRA
Posts: 2,245
dont set it too low, its not good for handling
__________________
#13 permalink Yes, it's an Acura EL
Join Date: Dec 2002
Location: 416-905, Ontario, Canada
Age: 32
Posts: 8,282
That it is not. Also, the underground parking garage at my new place is scary - I scrape pipe every time I go down it....time to raise it up.
#14 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
i am using neuspeed race right now and i want to go lower that's why i want to get coilover,
__________________
JDM
#15 permalink Yes, it's an Acura EL
Join Date: Dec 2002
Location: 416-905, Ontario, Canada
Age: 32
Posts: 8,282
Well, the Hayames in the rear will likely not go significantly lower than the Neuspeed race - however, if you go any lower with my Hayames for example the rear control arms will be in constant contact with the exhaust, resulting in rattly fun for all. The fronts, again, can be adjusted for ground-scraping drop if you desire.
#16 permalink Platinum Member
Join Date: Aug 2003
Posts: 1,570
telly: ok thanks for explaining to me. and i am looking forward to pick those up and installed them, i post some picture after i installed them.
__________________
JDM
#17 permalink Yes, it's an Acura EL
Join Date: Dec 2002
Location: 416-905, Ontario, Canada
Age: 32
Posts: 8,282
Yay!
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
