Rate Your Exhaust
#33
Registered!!
Join Date: Mar 2003
Location: Vancouver,BC
Age: 40
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 kakimoto gt1.0 something.. -custom piping-2.5"
Fit - - - - - - 4.0
Power - - - - 3.5
Loudness - - 4.5 without silencer 2 with silencer...its very loud without the silencer
Material - - - SS
Fit - - - - - - 4.0
Power - - - - 3.5
Loudness - - 4.5 without silencer 2 with silencer...its very loud without the silencer
Material - - - SS
#34
Registered!!
iTrader: (1)
Join Date: Nov 2004
Location: 707
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 251 apexi world sport I
fit - 4.0 (muffler tip hits my rear lip, shouldnt be problem for non rear lip peepz though)
power - 3.0 (mid-high is slightly "better". didnt notice any loss of low end *yet*?)
loudness - 2.5 (mild tone, deep sound, not rapsy at all, gets loud when u want it too but pretty quiet and fair below 4k rpm)
fit - 4.0 (muffler tip hits my rear lip, shouldnt be problem for non rear lip peepz though)
power - 3.0 (mid-high is slightly "better". didnt notice any loss of low end *yet*?)
loudness - 2.5 (mild tone, deep sound, not rapsy at all, gets loud when u want it too but pretty quiet and fair below 4k rpm)
#35
Join Date: Dec 2003
Location: Augusta, GA
Age: 42
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 254 APEX N1
Fit = 3, hangs a lil high and has melted one bumber already, hanger bars grind against a metal part of the car(does a civic have metal on it?)
power = 3, a friend of mine has a cavalier...we've been squarin off since we both got our cars. He had to learn to shift better to keep up after installing this
sound = 5, everyone knows when i'm coming. I don't even use my horn to signal people(honestly) I just rev a couple of times. Produces a nice tone thanks to a hiflow cat and whateverbrand headers i have(can't remember right now).
Fit = 3, hangs a lil high and has melted one bumber already, hanger bars grind against a metal part of the car(does a civic have metal on it?)
power = 3, a friend of mine has a cavalier...we've been squarin off since we both got our cars. He had to learn to shift better to keep up after installing this
sound = 5, everyone knows when i'm coming. I don't even use my horn to signal people(honestly) I just rev a couple of times. Produces a nice tone thanks to a hiflow cat and whateverbrand headers i have(can't remember right now).
#38
RSR ExMag
Fit: 5 It's solid without any rattles. Excellent construction.
Power: 3
Noise: 3 Nice throaty rumble at idle and doesn't start to sign until 3k+ RPMs.Quiet conversation possible at freeway speeds although you can hear the exhaust.
Fit: 5 It's solid without any rattles. Excellent construction.
Power: 3
Noise: 3 Nice throaty rumble at idle and doesn't start to sign until 3k+ RPMs.Quiet conversation possible at freeway speeds although you can hear the exhaust.
#39
One Slow Civic.... But I can take turns pretty well :-)
Join Date: Oct 2004
Location: Wilkes-Barre, Pa
Age: 39
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by GreatWhite02
Magnaflow Cat-Back(2.25") 02 Civic LX
Fit:5(until i got my body kit, had to lower the muffler to keep it off of the bumper and now mid-section hangs very very low like 2" above the ground)
Power:2(only because the D17's don't respond to bolts ons for ****! maybe around 5-7 at the most)
loudness: 3( i prefer quieter exhausts over louder ones! nothin is worse than driving on the highway to work and having a swarm of bees following you!)
Fit:5(until i got my body kit, had to lower the muffler to keep it off of the bumper and now mid-section hangs very very low like 2" above the ground)
Power:2(only because the D17's don't respond to bolts ons for ****! maybe around 5-7 at the most)
loudness: 3( i prefer quieter exhausts over louder ones! nothin is worse than driving on the highway to work and having a swarm of bees following you!)
#40
Jap-Euro Fusion
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (16)
Join Date: Jul 2002
Location: Washington DC
Age: 41
Posts: 13,151
Likes: 0
Received 3 Likes
on
3 Posts
Rep Power: 399 RS*R ExMag
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
#43
Abortion Survivor
iTrader: (33)
Join Date: Aug 2004
Location: Az
Age: 36
Posts: 2,967
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 269 Custom Exhaust with Tsudo mufflers
fit:4
power:3
loud:10 it used to be so nice until i got the headers and no cat i am gonna get a resignator or high flow cat to calm them down
fit:4
power:3
loud:10 it used to be so nice until i got the headers and no cat i am gonna get a resignator or high flow cat to calm them down
#44
Originally Posted by Boilermaker1
RS*R ExMag
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
#47
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (14)
Join Date: May 2003
Location: BC, Canada
Age: 41
Posts: 10,097
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 357 tanabe SRM cat-back
fit: 4 had to wrap foam around piping against hitting sway bar
power: 1.5~2 can't notice shiet
loudness: 4 loud but was used to it before i took it off
stainless steel, 60 mm in and 100 mm out
go stock.
fit: 4 had to wrap foam around piping against hitting sway bar
power: 1.5~2 can't notice shiet
loudness: 4 loud but was used to it before i took it off
stainless steel, 60 mm in and 100 mm out
go stock.
#52
Registered!!
iTrader: (1)
Join Date: Sep 2004
Location: Austin Freaking Texas
Age: 37
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 5Zigen
5Zigen supposedly,...got on ebay, anyways,
Fit: 4 (Good fit, not rattle on mine)
power: 3.5
sound: 4 (very nice low deep sound, not high and raspy like a lawn mower)
Fit: 4 (Good fit, not rattle on mine)
power: 3.5
sound: 4 (very nice low deep sound, not high and raspy like a lawn mower)
#53
Registered!!
iTrader: (1)
Join Date: Feb 2003
Posts: 6,521
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 324 A'pexi GT Spec Catback
Fit - 4 Fits great, no problems. It scrapes sometimes though.
Power - 4
Loudness - 3-5 Depending on if you have the silencer in. got it in and it sounds great
Material - Full SS
price - around $550-600
pize size is like 2.37"
Fit - 4 Fits great, no problems. It scrapes sometimes though.
Power - 4
Loudness - 3-5 Depending on if you have the silencer in. got it in and it sounds great
Material - Full SS
price - around $550-600
pize size is like 2.37"
#54
Registered!!
iTrader: (12)
Join Date: Jul 2002
Location: Sac, California, US
Age: 40
Posts: 1,310
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 #1 Thermal R&D Stealth Exhaust
Fit - 4 Fits great, no problems. Car was slammed so i scratched it a few times
Power - 3
Loudness - 2 I love the quiet nice tone it gave out
Material - Full SS
price - $490 shipped
#2 Greddy Evo 2
Fit - 4
Power - 3
Loudness - 4 It sounds louder then my Thermal but sounds good still
Material - Full SS (1st Greddy Evo isn't)
Fit - 4 Fits great, no problems. Car was slammed so i scratched it a few times
Power - 3
Loudness - 2 I love the quiet nice tone it gave out
Material - Full SS
price - $490 shipped
#2 Greddy Evo 2
Fit - 4
Power - 3
Loudness - 4 It sounds louder then my Thermal but sounds good still
Material - Full SS (1st Greddy Evo isn't)
#56
Registered!!
Join Date: Apr 2001
Location: Tennessee, US
Age: 65
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by nindoo
Does anyone have an adjusttable exhaust? Can anyone adjust the back pressure on there exhaust?
Just installed Supertrapp Wavetech tuneable muffler.
*SS construction with super deep tone.
*Add discs to muffler to increase loudness and top end power
*Remove discs to quiet and increase low end power.
If you put in the max number of 12 discs, your car will wake the dead and the interior will rattle.
I have 5 discs in due to the 7000 RPM redline on my engine. It is still loud at wide open throttle, but I can't compare the power difference to the previous Apexi N1 because the motor has been upgraded a little bit more.
#57
Registered!!
iTrader: (2)
Join Date: Nov 2004
Location: Montreal, Canada
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 5Zigen Fireball (DC5 Retrofit)
Kamikaze Header
Random Tech. Hi-Flow Cat
Fit -4 (adjustments had to be made)
Power -3 (low to mid)
Loudness -3 (just abit more than stock, love the sound)
Price: 780CAD or (610US) for everything
Kamikaze Header
Random Tech. Hi-Flow Cat
Fit -4 (adjustments had to be made)
Power -3 (low to mid)
Loudness -3 (just abit more than stock, love the sound)
Price: 780CAD or (610US) for everything
#58
Registered!!
Join Date: May 2003
Location: SoCal
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 boilermaker exhaust
where did you get your exhaust, is it cat back and how do you like it compared to a greddy or a dc!!
Originally Posted by Boilermaker1
RS*R ExMag
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
Fit - 5 Fits up in the stock exhaust tunnel, doesn't hit anything, tucks right up under bumper
Power - 3 Midrange help
Noise - 1 Stock with a lower pitch.
Full Stainless, ceramic coated, 60mm piping, 100 mm tip.
#59
DOHC i-VTEC TiMEX
iTrader: (10)
Join Date: Nov 2002
Location: the OC
Age: 40
Posts: 7,266
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 338
Originally Posted by kornsined
Fit 1 to 5: How well does it fit the car without cutting, making new hangers, etc. 1=fit like hell, all the way to, 5=fit tighter than stock without rattle.
Power 1 to 5: 1=less power than stock, 2=about the same as stock, 3=some gains, 4=very noticeable, 5=Feels like its been boosted
Loudness 1 to 5: Volume 1= Quieter than stock to 5= Loud, wakes the neighbors when you get on it.
After the name is the material: SS= Stainless Steel, PS= Stainless can only, AS= Aluminized Steel and then the pipe/tip diameter.
Also if you decide to update your review at any time just insert *UPDATE (and the date)*
__________________________________________________ ______________
*UPDATE 12/18/04*
Tanabe Tuner Medalion - SS (muffler only, custom piping)/2.25"/4"
Fit - - - - - - 4.6 (rattles in heavy rain/going through puddles/deep snow)
Power - - - - 2 (without silencer) 3.5 (with silencer on)
Loudness - - 4.5 (without silencer) 4 (with silencer on)
Power 1 to 5: 1=less power than stock, 2=about the same as stock, 3=some gains, 4=very noticeable, 5=Feels like its been boosted
Loudness 1 to 5: Volume 1= Quieter than stock to 5= Loud, wakes the neighbors when you get on it.
After the name is the material: SS= Stainless Steel, PS= Stainless can only, AS= Aluminized Steel and then the pipe/tip diameter.
Also if you decide to update your review at any time just insert *UPDATE (and the date)*
__________________________________________________ ______________
*UPDATE 12/18/04*
Tanabe Tuner Medalion - SS (muffler only, custom piping)/2.25"/4"
Fit - - - - - - 4.6 (rattles in heavy rain/going through puddles/deep snow)
Power - - - - 2 (without silencer) 3.5 (with silencer on)
Loudness - - 4.5 (without silencer) 4 (with silencer on)
Fit - 5
Power - 4
Loudness - 2
Um ... steel w/ ceramic coating / chrome tip
Greddy Evo 2
Fit - 2
Power - 2.5
Loudness - 3.5
SS
Tanabe SRM
Fit - 4
Power - 2
Loudness - 4
SS
Last edited by aznboysrfr; 03-09-2005 at 12:59 PM.
#60
Registered!!
iTrader: (1)
Join Date: Aug 2001
Location: Pearland,TX / PR
Age: 45
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 RSX Type S Exhaust
Fit 3 - Has to be modified but fit perfectly with no rattles.
Power 3 - Some Increase through all the rev range with no loss in low range.
Loudness 2 - Almost same as stock civic exhaust.
Fit 3 - Has to be modified but fit perfectly with no rattles.
Power 3 - Some Increase through all the rev range with no loss in low range.
Loudness 2 - Almost same as stock civic exhaust.