HP Header installed (pics) EX DIY updated AGAIN with performance review
12-18-2004
#92
Registered!!
iTrader: (7)
Join Date: May 2004
Location: Kanada
Posts: 3,435
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 277 
My HP shorty header experience...
thanks ironfist for the DIY. unfortunately i ran into trouble with that 4th bolt on the top of the header. didn't have a deep socket so the socket i used basically rounded the nut 
. long story short had to go to a mechanic i knew and he ended up screwing me over for money. quoted me an hour then charged 2 hours 
. so i payed $110CDN to install it 
. whatever i only paid $20 for the actual header. As for performance i noticed my rpms were high since this so called mechanic did not reset my ecu. after i did that. i noticed some small gains but still nothing earth shattering(i also had my silencer off). actually i had removed my silencer on my exhaust and i swear that gives me the best gains out of any mod so far. with my silencer i noticed my exhaust is quieter now and my whole powerband feels smoother. my rpms don't drop as fast. it's actually kinda weird because my car doesn't feel like it's pulling harder but by looking at my speedometer it "seems" to accelerate quicker. i know this is just a butt dyno and small observations on my part so take it for what it's worth. i know i don't believe much without a dyno either. Is it worth the money I paid for it? yes. Is it worth the money brand new? undecided as of this point. i'll have to see how the ecu adjusts over a couple of weeks and i'll keep everyone informed.
. long story short had to go to a mechanic i knew and he ended up screwing me over for money. quoted me an hour then charged 2 hours . so i payed $110CDN to install it . whatever i only paid $20 for the actual header. As for performance i noticed my rpms were high since this so called mechanic did not reset my ecu. after i did that. i noticed some small gains but still nothing earth shattering(i also had my silencer off). actually i had removed my silencer on my exhaust and i swear that gives me the best gains out of any mod so far. with my silencer i noticed my exhaust is quieter now and my whole powerband feels smoother. my rpms don't drop as fast. it's actually kinda weird because my car doesn't feel like it's pulling harder but by looking at my speedometer it "seems" to accelerate quicker. i know this is just a butt dyno and small observations on my part so take it for what it's worth. i know i don't believe much without a dyno either. Is it worth the money I paid for it? yes. Is it worth the money brand new? undecided as of this point. i'll have to see how the ecu adjusts over a couple of weeks and i'll keep everyone informed. 
12-18-2004
#96
Registered!!
iTrader: (2)
Join Date: Oct 2004
Location: Houston
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
ive noticed that most people on here that have HP headers only get the top portion. i got the header that goes all the way to the undercarriage, where it then bolts up to the cat.
heres a pic incase you were wondering:
heres a pic incase you were wondering:
12-18-2004
#97
The Beer-man
iTrader: (1)
Join Date: Sep 2003
Location: Jax, FL
Age: 42
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Ironfist:
If you are looking for that quiet, good looking, hp gaining exhaust syste, look here:
http://www.rs-r.com/products/exhaust/exmag.php
They even have pics of what it looks like on our cars. You can get them for about $450 on Ebay and $525 at www.robearracing.com
If you are looking for that quiet, good looking, hp gaining exhaust syste, look here:
http://www.rs-r.com/products/exhaust/exmag.php
They even have pics of what it looks like on our cars. You can get them for about $450 on Ebay and $525 at www.robearracing.com
12-18-2004
#98
Registered!!
iTrader: (1)
Join Date: May 2004
Location: fontana, ca, (909)
Age: 39
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 the pics on the first page... i notice on the stock header the little hole for the o2 sensor i think it is. in the hp header i didnt see it. or maybe i just missed it. does the hp header have that little hole?
Your started a very popular thread 
12-19-2004
#103
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (3)
Join Date: Jul 2002
Location: Chicago Burbs, Other, ZEBRA
Posts: 22,702
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 503 
Originally Posted by kornsined
whaa???
12-19-2004
#104
Registered!!
iTrader: (1)
Join Date: Nov 2004
Location: 707
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 251 anybody know how big the diameter of the actual piping is? from the innerside that is, not outside.
im in the market for a header but i dont know wheather i should go with dc 4-1 cermic or the hp cermic. i know the hp got biggers pipes, but with smaller pipes > higher pressure > low end. so if anyone can measure either the hp top portion header, and/or the dc cermic header... i'd appriceate it. 100 pts if u like =D
im in the market for a header but i dont know wheather i should go with dc 4-1 cermic or the hp cermic. i know the hp got biggers pipes, but with smaller pipes > higher pressure > low end. so if anyone can measure either the hp top portion header, and/or the dc cermic header... i'd appriceate it. 100 pts if u like =D
12-23-2004
#108
Registered!!
iTrader: (7)
Join Date: May 2004
Location: Kanada
Posts: 3,435
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 277 how big is the megan downpipe? the stock EX one looks big enough already. jttegx get the HP header if it's cheap. so far i noticed as small gain but nothing worth paying brand new. keep in mind i haven't been able to drive to hard around here since there's snow galore.
12-24-2004
#109
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (3)
Join Date: Jul 2002
Location: Chicago Burbs, Other, ZEBRA
Posts: 22,702
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 503
Originally Posted by jttegx
bump
ironfist, hows the hp shorty doing so far? i might think about purchasing one off a local here. so let me know bro
ironfist, hows the hp shorty doing so far? i might think about purchasing one off a local here. so let me know bro
01-02-2005
#111
Registered!!
Join Date: Oct 2004
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 are u lookin for just the top portion or the one with the high flow cat??? and do u have ex or lx?? if u have AIM get at me: CanibusJrX
I can probably get u a good price on either.
I can probably get u a good price on either.
01-02-2005
#113
OMNES AD UNUM
iTrader: (3)
Join Date: Sep 2003
Location: NOR-CAL
Posts: 5,855
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 309 www.horsepowerfreaks.com "170 shipped on sale"
01-03-2005
#116
CIVIC USER
iTrader: (3)
Join Date: Oct 2004
Age: 39
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
I broke the middle engine bolt right off while installing my dc sports header and Im not really sure how to fix it. I know if I dont fix it soon theres going to be leakage. Does anyone know how to fix this problem?
01-05-2005
#118
Registered!!
iTrader: (1)
Join Date: Aug 2003
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 im putting my car back to stock to trade it in so im selling a megan racing downpipe for $80 i only used it for like 10,000 miles, its like 2.5 sie piping, the stock is big at like 1.75-2 i think, i noticed a gain with it though better throttle response and top end speed, if you have intake, header and exhaust without high flow cat you will definately notice a gain with it, doesnt make the car that much louder either.
01-06-2005
#120
Registered!!
iTrader: (7)
Join Date: Dec 2004
Location: Belgium
Age: 41
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 243 wel here is my instelled hp racing 1 piece header whit the
cat replacer and o2 sencor module but dindt installed it
had to remove som steel on the subframe ..
grtz
cat replacer and o2 sencor module but dindt installed it
had to remove som steel on the subframe ..
grtz
