[DirtyCivic]

Did a retrofit in my 2002 civic and need help with high beam wiring currently i have only low beam working. I have the g35 bi-xenon projectors. Im thinking this wiring will work if anyone knows let me know.. Here are some pics..









Then i was bored and did a front end converstion..


and this is the wiring my car is ground switched..

[joe6680]

http://www.civicforums.com/forums/at...2&d=1156304629

[DirtyCivic]

Originally Posted by joe6680

http://www.civicforums.com/forums/at...2&d=1156304629

the g35 projectors come with a motor that moves so you get hight beams.

[HonCiv02]

nice retro, looks good!

[electric130]

wiring diagram looks like it should work. is it not working?

[sl33pyriceboi]

if u place ur diode in a negitive current, put it backwards for a forward flow. thats wt i found out when i did mine. mine works.

[electric130]

he's not using a diode in that diagram. doesn't need one either.

[EggRollBandit05]

I have fx projectors that look very similar. Just hooked them up to bixenon harness i bought and it was good. I dont think the polarity matters for the solenoid i remember testing it with a 9v battery and it was enough to trigger it, all they need is the power source and they should work

[TemjinX2]

nice, you just needs some shrouds. why g35 bixenons instead of TL's? cost?

[DirtyCivic]

I havent built the wiring harness yet. .Just wanted to see if this one would work.

Originally Posted by electric130

wiring diagram looks like it should work. is it not working?

[DirtyCivic]

I didnt go with the TL's because i got these for almost nothing.

Originally Posted by TemjinX2

nice, you just needs some shrouds. why g35 bixenons instead of TL's? cost?

[TemjinX2]

Originally Posted by DirtyCivic

I didnt go with the TL's because i got these for almost nothing.

yeah thats what i figured, given the superior output of the tl's. Then again any hid projector will be a huge improvement over stock...shroud it up and you got a winner.

Post some wall shots too, so we can see the cut offs.

[DirtyCivic]

Originally Posted by TemjinX2

yeah thats what i figured, given the superior output of the tl's. Then again any hid projector will be a huge improvement over stock...shroud it up and you got a winner.

Post some wall shots too, so we can see the cut offs.

Oh a huge improvement over stock, this is my first retro just wanted to try it and love the result. It not the same as slaping some hids in like everyone does. These have a nice cut off line that dont interfere with other drivers, will have more pics soon. And when you say a shroud that is a cover covering the back part and only showing the projector? What is the whole purpose of it i know during day if i have the lights on i could see a bit of light showing on back part of headlight.

[TemjinX2]

Originally Posted by DirtyCivic

Oh a huge improvement over stock, this is my first retro just wanted to try it and love the result. It not the same as slaping some hids in like everyone does. These have a nice cut off line that dont interfere with other drivers, will have more pics soon. And when you say a shroud that is a cover covering the back part and only showing the projector? What is the whole purpose of it i know during day if i have the lights on i could see a bit of light showing on back part of headlight.

no real purpose other then making the car look like it came like that from the factory. It'll just make your retro seem more complete.



This is a pic from my e46 retro on my old civic.

[DirtyCivic]

Originally Posted by TemjinX2

no real purpose other then making the car look like it came like that from the factory. It'll just make your retro seem more complete.



This is a pic from my e46 retro on my old civic.

what did you use to create the shroud? I seen people use old shirt and (something weld cant think of a word)