Anyone with Q series cross them any lower than 80?

J187 · 10-17-2004

anyone use a xover point of less than 80 on Quarts? Mine don't seem to like to be crossed over higher than 80 at all.

To remove this ad, register today for free or log in if already registered!

darklegacy540 · 10-17-2004

I'm going to assume you're talking about subwoofers. I don't have quarts but the subs I do have, I have them in a sealed enclosure. I keep the xover point at 80hz and subsonic filter at 25hz. What type of enclosure are you using?

Mystic3030 · 10-17-2004

I dont go lower than 80 on my quarts either...they are notorious for not handling really low midbass very well....but the rest of the frequencies sound oh so beautiful

J187 · 10-17-2004

Quote:

Originally Posted by Mystic3030

I dont go lower than 80 on my quarts either...they are notorious for not handling really low midbass very well....but the rest of the frequencies sound oh so beautiful

So what do you use for a point?

fonto · 10-17-2004

When I had quart PSDs I crossed them over at either 88 or 106hrtz. Qs can go lower though...I would cross them over at 80hrtz, or slightly lower depending on how much power you are giving them.

I think that is what really seperated the Qs from the Premiums, they can handle lower frequencies better.

Mystic3030 · 10-17-2004

It depends on what im listening to and how loud I want to go...for loud rap I keep it at 125 to save my speakers

, when Im listening to anything else I go with either 80 or 100.

alex053 · 10-18-2004

my premiums are between 65 and 70 with no problems.

Mystic3030 · 10-18-2004

Yeah but you have PCE's alex, right? I have PSD's