Other Honda Civic Parts and ProductsPost new products, talk about parts other than Honda Civic electrical, drivetrain and Suspension. This forum is only for Other Honda Civic Parts and Products.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
Doesn't look like it'll do much unless all three mounts are replaced with something similiar to the damper. Besides, shouldn't need it unless you pushing some large numbers.
They are a nice alternative to polyurethane mounts. But since they don't make them for our car, and I didn't care to fabricate brackets, I just polurethaned my rear mount and its all good. Only difference is a PU mount will cause alot more vibration that the dampener will.
I'll look in the engine bay when I get off work and see wher the hell I can attached to engine and body. If you figure something out post it. I'd rather bolt then weld to the frame.
ok if we're gonna mount this thing topside in the bay meanin on the top on the engine in view as opposed to under the engine.. i can only see ONE place on the engine to bolt it to. which is the driver side motor mount braket. as for mountin to the frame.. well we can either use one of the 3 bolts for the mount on that side or we're gonna HAVE to weld a plate on.
Originally posted by RiceBuRNeR I can fabricate the weld on tabs, as soon as someone tells me what size we need Ill order one and get crackin on the tabs!
I found a place that sells one made for our cars, D17 and all.
Go to jhpusa.com
I think they wanted like $100 for it but its adjustable and made really well. Adjusts so you cna make it soft and not get all the vibrations coming through when your jsut cruising around and then tighten things up when you need too. Although the $40 thing sounds cool too
Originally posted by thecheat I found a place that sells one made for our cars, D17 and all.
Go to jhpusa.com
I think they wanted like $100 for it but its adjustable and made really well. Adjusts so you cna make it soft and not get all the vibrations coming through when your jsut cruising around and then tighten things up when you need too. Although the $40 thing sounds cool too
well link me cause all i see is K , and B SERIES no D.
I called and talked to the guy there a while ago, he said they had one for the D. I'll call again tomorrow and double check, but I was real clear that I meant D and not B. I think the damper was made by J's racing or something like that.
The ones on the ep3 adn the dcs have the brace going perpidicular to the engine and the mount, meaning that the brace is, if your looking at your engine from the front, mounted parallel to the fenders. I think this makes the most sense in absorbing shock as the engine rocks front to back. Most on ebay have them mounted diagonally or horizontally.
does anybody have a good engine bay shoot of the driver side from above that section of the mount and driver strut mount area?
I can photochop this thing on the car to get an idea.
Last edited by PunkingCivic; 04-01-2004 at 08:23 AM.
We might have it!!!!! 
