Overall impressions: This is a unique intake with many interesting features that puts it above the other brands.
Fitment: alot of custom "getto' rigging is required, including zipties to hold the breather tube straight, and keep the intake from sagging down. Also requires wrapping tape around the air temp sensor so it doesnt fall out and extending the wires to reach midpipe.
Sound: the quietest intake you will ever find, mainly due to the pipe design and oiled foam filter. you can barely hear it at all unless you really mash the gas and even then its not annoying. it also makes a turbo pss noise when the auto trans shifts between gears over 4k rpms sometimes.
Filter quality: the filter itself is well built, it requires a special tacky oil that really stops dirt like a glue and requires cleaning once a year. it stops as much or more dirt than a stock paper filter, yet flows more air than an open pipe due to its built-in turbo velocity stack.
power gains: with any intake, the gains are minimal, but ive noticed more low end power with this particular brand.
Just make sure the filter is clamped down hard because mine came off the pipe once. i think i had the clamp put on too close to the filter inlet tho.
