1995 Hatch SI Boosted with big turbo for sale!

[Hairball II]

~Block~ B18b block SRP 8.5:1 forged pistons JE turbo piston rings (filed and gaped) JE locks/pins Eagle H-beam rods ARP rod bolts Golden Eagle block guard ACL Bearings Polished Crank Cylinders honed to .005 clearances Decked .004 Balanced/Blue Printed 1.5k miles Solid B18 swap mounts ~Head~ B18b complete with only 5k on it and has a mild port polish with a 3 angle valve job Powdercoated valve cover ARP headstuds NGK Plugs 10.2 Wires STR sheet metal intake manifold with tapped for nitrous but capped for now. Tapped for all sensors including the gm 3 bar. Aluminum radiator with slim fan. Tranny: B18c1 ACT SSHD clutch GSR Axles Exhaust: 3 inch down pipe Heat wrapped 3 inch flew pipe 3 inch Glass pack Dumped before the gas tank but I will include more piping if needed Fuel/Tuning: 450cc injectors DSM register box Blox Fuel pressure regulator Walbro 255 fuel pump 3 bar GM Map sensor Summit Fuel pressure gauge Polished high flow fuel rail P06 with Neptune Turbo: Polished holset hx-35/40 with 4" anti surge inlet. All correct oil line fittings THIS TURBO CAN MAKE BIG POWER! It is as big as a gt35r and spooled 15psi by 4000 on my 2.0 talon. (http://www.youtube.com/watch?v=tXmcA...eature=related ) OBX tubular manifold with bracing to prevent cracking TIAL 38mm wastegate 29x11x3 FMIC Supports 600hp 2.5" intercooler piping Beadblasted DSM 1g BOV Custom boost controller Autometer Boost Gauge VDO Oil Pressure Gauge Function 7 oil restrictor Suspension: H&R lowering springs 5 spoke 14" rims Exterior: Amber corner lights Front and side lips Interior: 2 Pod Gauge Pod May include a corbeau forza seat Shell: black 95 si, NO RUST, rear disc, sunroof, great interior. It has some dents in the roof that can be taken out with heat. I will tell you how if you do not know. (I am a body man) Car has a clean title. Needs a tune. I got it on a trade and reassembled it but do not have time for this car and its not really my style. The car runs and will drive but I have not boosted it or driven it more than around the parking lot since I do not have it registered. I did drive it before my buddy tore it down so I know that it runs and drives fine. The only thing he had different was the turbo. The tuner i talked to said this car will make 300-350hp pretty easily and obviously more with bigger injectors. This car would be a great project to pick up since all it needs is a tune, and a windshield if the crack bothers you. Please let me know if you have any more questions and I will post more pictures up as soon as I can but for now all i have are build pics. Looking for $5500

To remove this ad, register today for free or log in if already registered!

[Hairball II]

Sorry I forgot to say I am located near Williamsport PA.

[Hairball II]

Anyone interested in the car freshly painted satin black like below*, and all the other parts except the turbo, wastegate, and intercooler pipes. Make offers!!!


http://sportscarforums.com/f14/matt-...-c3-26122.html

[Hairball II]

$4000 .

[sleepyhatch]

Are you up for trades? I have a mazda protege5 5 speed, 98xxx miles with a carbon ti exhaust and tein springs plus 500.