Speaker Comparison

[MooZleZ]

Hi, I'm thinking about getting 2 new Rockford Fosgate speakers 6"x9" and I was thinking about these two, dont know which are best. T1693C Configuration: 3-Way Full-Range Midrange Diameter: 6"x9" Midrange Depth: 3" Tweeter Diameter: .5" Frequency Response: 40Hz - 22kHz Power Handling: 110 Watts RMS 220 Watts Peak Crossover High-Pass (HP): 12dB Sensitivity: 90dB @ 1 watt/1 meter Grilles Included: Yes Mounting Hardware: Yes Shipping Weight: 9.9 Lbs. (4.5 Kg.) P1692S Configuration: Twin Drive Full-Range Midrange Diameter: 6"x9" Midrange Depth: 3.1" Tweeter Diameter: .75" Frequency Response: 50Hz - 22kHz Power Handling: 60 Watts RMS 120 Watts Peak Crossover Low-Pass (LP): 12dB High-Pass (HP): 12dB Sensitivity: 90dB @ 1 watt/1 meter Grilles Included: Yes Mounting Hardware: Yes Shipping Weight: 9.8 Lbs. (4.4 Kg.) There's also the difference that the Punch P1692S is a Component System and the T1693C isnt. which ones are better ? cuz I can get em both for same price atm. Thanks,

To remove this ad, register today for free or log in if already registered!

[Syke Fu]

The specs look almost the same, except for the RMS rating. Whichever one you get, be sure to get an amp that will match the RMS rating.

[MooZleZ]

well I have an amp that'll do the job 4*250W RMS so that'll do

but I was wondering what the difference in performance is between a component set and a composite set.

[MooZleZ]

I ended up getting the P1692S speakers, cuz my m8 who owns a local car audio shop said they would sound better than them cuz they have them tweeters and stuff onnit and the others dont.

so I installed them and they sound nice now I ordered some front speakers to go with em. also Rockford Fosgate ofc.