Honda Civic SuspensionHonda Civic Suspension can do many beneficial things. Some lower the suspension for style while others do it for racing. This is where you can give and take information about the Honda Civic Suspension setup.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
like the title says, i need help. a 30 min job has turned into a 2 day battle royal. I started with a replacing the drivers side axle shaft. I hit a couple rough spots due to rust, etc.. it all would have went smooth if it werent for the lower ball joint. I tore the boot using some stupid fork to disconnect the ball joint. I figured i would just replace it, so i wasnt very careful around the threads. Now the threads are shot in the stud and i cant get the damn thing out. I have the clamp with spacers to press it out, but its positioned in there so that none of the spacers will lay flush on the flat side.
How do i get this damn thing out!
solved it.. took everything apart, stuffed it into the bench vice and it came right out.
To remove this ad, register today for free or log in if already registered!
Last edited by laack; 10-09-2009 at 12:40 AM.
Reason: solved
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
