*PICS ADDED* Hello! just got a 2001 Inca Pearl Civic Coupe EX

NuclearBacon · 05-14-2008

Hello!!! i just got a ...well like the title says and i just found your site! i got it with a blown engine in it, and i will be putting another D17a2 into it this summer.

ITs that crazy color (inca Pearl) with a matched painted body kit, short throw and a bunch of engine, suspension, and drive train goodies. lightweight pulleys, ect...

i'm a HUGE Subaru guy ( i own 4) and i race in 2 different rallyX championships and rally's... this is my first "performance" honda

so be gentle

I'll get some pics and also keep everyone posted on my build! should start next month!

thanks for having me!
Luigi

NuclearBacon · 06-11-2008

ok!!!! The engine is ready to come out!!!! its dis-assembled and all bolts holding it together are finger tight...

i'm planning to pull it out july 4th weekend, and get started on dissasembling it to see what the hell happened with the last owner.... funny side note though.. the previous owner said they drove over a puddle and it stopped... after taking the intake off, i looked into the intake baffle below the throttle body and it was a LAKE of water.... i pulled out OVER A QUART of water before i stopped measuring the amount... thats A LOT OF WATER!!!! crazy!! my concern is water possibly being stuck against one of the injectors and ruining it... so i might have to get a set of stock D17A2 injectors from someone on here...

also if anyone knows if any of the sensors in the baffle below the throttle body could have been destroyed by the standing water, it'd be good to know so i can source them....

this car (when its running again) is going to be AWESOME! another to the fleet!!!

i'll take some pics of the engine bay, and also the DC sports headers i took off (going onto the new engine) and some of the lightweight underdrive pulleys... lots of goodies!!!!!

RallyeRedRider · 06-11-2008

Sounds like a plan.
Been there done that myself, only with my truck and salt water.

Were you keeping the D17 for the simplicity, price, and MPG's? It's a great time to go K-20 or something if you want to put a little more money and effort into the swap.

NuclearBacon · 06-13-2008

hey! thanks for responding!! since i only have about a 2 month window.. (only including weekends) i think a direct swap is my only option.... as for my subaru's (my wagon especially) .. its got a closed deck STi engine from 1992, and everything has been altered....

....this thing will still be fun... and then i'll sell it

TemjinX2 · 06-22-2008

might be cheaper just to buy another d17. The whole engine usually goes for $500-700 on ebay.

NuclearBacon · 06-23-2008

Theres a place close by my house called Attarco... for $495, i get a D17a2 with ALL the accessories (minus AC, Power steering) and they oil pressure test, leak down test, and give it 6 months for a warrenty!! AND!! they deliver it to my doorstep.

sweet! recieveing july8th, old engine will be pulled and diagnosed july 4th weekend. pics to come!!!!!!!!!!!!!!

Keet · 06-24-2008

Yeah, I think everyone on here would vouch for the K20 if going to the trouble of swapping, and given your racing background ofcourse.
LOL, most people start with a Civic and only dream of having a Subaru one day.
Welcome to the Forums.

NuclearBacon · 06-24-2008

Thanks for the welcome! Yeah, its a sickness..... i know this is the wrong place for it ... but if you're curious.. this is what i've got:

1987 GL10 Sedan 3.700 LSD Rally Car
1988 XT6 FT4WD 3.900 Center Diff Lock
1992 EJ22T Touring Wagon 5MT Swap 4.111

all are FAST FAST FAST! hehe, ok ok PICS i know (of the civic) .. i think alot of you guys (and girls) would cry to see the dust and pieces this thing is in... but no worries!!! when i'm done... it'll be SHOW!

Question (since i'm here) ... i'm going to paint the engine/transmission while they're out of the car.... right now, my plan is to paint the entire engine inca pearl, then stripe off construction style with tape, and paint it black... so the engine will turn out BLACK with GOLD stripes.... and yeah, i'm willing to kick back a few cold ones while i take an afternoon to do it right (the masking that is.. painting will take over a week i think)

What does everyone think?? (and i'll get on pics i PROMISE, just got a new puppy, and she's taking up the memory cards.) thanks again!!!!!

Keet · 06-25-2008

Quote:

Originally Posted by NuclearBacon

Question (since i'm here) ... i'm going to paint the engine/transmission while they're out of the car.... right now, my plan is to paint the entire engine inca pearl, then stripe off construction style with tape, and paint it black... so the engine will turn out BLACK with GOLD stripes.... and yeah, i'm willing to kick back a few cold ones while i take an afternoon to do it right (the masking that is.. painting will take over a week i think)

Well it is a bit extreme to even paint anything that you don't directly see when the hood is open. On top of that you get so much dust and grime in there, it's tough to keep clean. So assuming the paint holds really well, then such striping details wouldn't be noticed. I really like the idea of painting it all inca pearl, if you are gonna go with anything, I say go with just that. If any chipping/peeling/flaking happens then you won't notice it as much as you would with black.

NuclearBacon · 06-25-2008

interesting... so have the engine the same color completly you say....

..... hmm.....

JeyDog7 · 06-25-2008

Without pics

NuclearBacon · 06-27-2008

The time has come... PICS!!!! as you can see its midnight... and i need to be at work at 6.

.... you're welcome

whats great about it, is that you guys (and girls) can tell me some of the crap i have on this thing!

Lets start with a full body shot:

Next a front shot (The front body color'd kit bumper is currently inside the car.... with the stock rear and front bumpers

Right now when you open the hood...

another shot

And heres where the headers are supposed to be.. the passenger seat! DUR!

I filled up two of these guys with what was SITTING in the intake plenum, and then just started dumping the rest of the water onto the ground... it sucked up A LOT

Heres a shot of the interior:

And of course you've tried to fit 3 bumpers in YOUR back seat...

Another shot of "Natural Placement"... throttle body and Alternator.. sitting on the passenger floor... notice the underdrive pulley

faaaancy,, theres one on the power steering compressor...

and last but not least, the dual canister DC sports exhaust..

I hope youve enjoyed this photo tour... whatcha think??!!!
Don't be shy, i'm curious where this sits among the honda crowd... since i'm not really in it

LAY IT ON ME!!

NuclearBacon · 06-30-2008

really? no opinions??

JeyDog7 · 07-01-2008

Well thats seen better days

I think she needs a little TLC and she'll be fine

NuclearBacon · 07-01-2008

im surprised more people havent dogged / supported the body kit.. or the color.. or the parts... i know nothing with the hondas....

...i guess no news is good news... t-minus 3 days and counting til engine teardown!!

pics? of course

Keet · 07-03-2008

There's actually a lot there that I like, I was expecting a total nightmare, but it's a good starting point. You got the moon roof, painted mirrors and handles. Back windows are tinted, but good luck matching the side windows :P

The Octane rear bumper (or sometimes called R34) looks really good in that color, I normally don't care much for it. The pedals are a good touch, but the rims look like they belong on a Neon.

I wonder if that header would fit on the D17, it'd be a nice bonus.

I'm sure in time you'll resurrect this thing and make it roadworthy.

NuclearBacon · 07-03-2008

actually, im not sure if i really mentioned it, but EVERYTHING thats now off of the car, i took off....

the car was running with everything you see... headers, ect... what happened was the guy had a first generation Injen intake, the one that goes into the bumper.... (i contacted injen to see if this was a common problem, and they never responded back to me...) he ran over a puddle, and it sucked up water.. yeah a puddle... BLEW the engine... had geico put in ANOTHER ENGINE AT THE HONDA DEALER... he re-installed his injen intake.. and blew the SECOND motor...

so the motor you see sitting there, is a honda factory motor FROM the dealer, with less then 8000 miles on it... also blown...

did i mention that all the spare pieces will be FOR SALE? the VTEC head (with 8k miles) not to mention all the spare knick nacks i'll have left...

i'll get a model number on the exhaust.. ive never seen anything like it...

haha, yeah the rims are ...odd... and the pedals will be coming off... (i'd like to get some decent ones if i were to do it right... its called an R34 eh? interesting...

Tomorrow it BEGINS!!!! and i'll have PLENTY of pics to show

thanks for the reply Keet!

Ravensteel · 07-03-2008

I'm glad to hear you'll be selling some of those parts...that way you can get the parts that YOU want to make the car reflect your style.

I like those wheels they have a torque thrust / turbine look to them.

Good luck and keep us posted

NuclearBacon · 07-08-2008

The engine is out!!!! and in a million pieces!!! I'll let the pictures speak for themselves....

*cough cough.. FOR SALE!! cough* any engine pieces anyone needs???? oh!!! ESPECIALLY the head... its got like... 8k miles on it!!! (although i would not reccommend just bolting it on....

haha. My Gangsta pose...

Theres MANY more..... HERE!!!!!!

DDragon7 · 07-08-2008

Looks like one messed up engine for only 8k miles.

NuclearBacon · 07-11-2008

THE NEW ENGINE IS HERE!!!!! THE NEW ENGINE IS HERE!!! It just got delivered this morning!!! sweeeeet! i also ordered (two days ago) a few parts... ahem:

-Honda OEM Thermostat
-Honda OEM Thermostat mount
-Honda OEM O-rings for hard water line(s)
-Honda OEM rubber hose (connecting the two hard water lines)
-Honda OEM Water Pump
-Honda OEM intake gaskets to metal (4)
-Honda OEM intake gasket front injector base
-Honda OEM timing belt
-Honda OEM Throttle body gasket
-Oil Pump Gasket
-Exedy Stage 1 Organic Clutch Kit (same as i have on my subaru, I LOVE IT)
-Valve cover gasket set
-Front Main Seal
-Rear Main Seal

also done:

-Flywheel resurfaced (it looks AWESOME)

Many more parts are to be ordered, and i'll keep everyone posted as the build continues... Who ever ends up with this car, will have a 30,000 mile BRAND new civic, without any leaks, and with all new gaskets.. this thing should run FOREVER...

.....the new intake will also be on its way, one that doesnt suck up water

NuclearBacon · 07-16-2008

Just got the clutch and all the parts in... the new engine will be re-assembled this weekend! hopefully if all goes well, it'll be in the car by sunday....

NuclearBacon · 07-22-2008

Ladies and gentlemen, the engine is in the BAY!!!!!!! Saturday was mostly assembly with new parts and pieces including:

New front main seal (you can see the old water pump)

New water pump..

New o-rings (2) and new hard-to-soft-to-hard waterline

(anti freeze seen is to lubricate o-ring)

New timing belt

Then we thoroughly cleaned the pan and the inner spacer..

wiped down the bottom end and put a nice bead of RTV grey

Then it went on to the new rear main seals...
Old:

New:

Next went the flywheel
Before machining:

After:

and the Exedy Stage 1 Organic Clutch

and the pressure plate

New EGR Gasket

New intake gasket

as well as those 4 rubber intake guides that seat onto the actual manifold..

Also took some time and really cleaned the inside of the engine bay

(also cleaned the transmission but forgot to take pics)
.....cont......

NuclearBacon · 07-22-2008

Then mated the engine to the transmission...

oh, just kidding, heres the transmission before cleaning...

and after cleaning...

then the engine starts to go in....

closer...

clooooseeerr....(and me)

Button up those mounts son!!

almost...there...

and its in!!!

my dad sacrificing himself to the pressure washer gods...

Sophie rests between engine installs...

only to be BACK IN ACTION! Mechanidog ready for duty!

This next coming weekend, will just be hooking up the last few things, new spark plugs, rad hoses, exhaust gasket, fluids, and final check..

....then we turn the key.....

after the bugs are fixed, new brake pads, kyb-gr2 shocks, and new tires....

Stay tuned!!!

Many more pics here.... http://www.putfile.com/album/196287

Rufus · 07-22-2008

I just found a 2001 for sale here in AZ for $1000. I'm tempted to buy it and throw a motor in.

NuclearBacon · 07-22-2008

Quote:

Originally Posted by Rufus

I just found a 2001 for sale here in AZ for $1000. I'm tempted to buy it and throw a motor in.

WOW $1000? why is it so cheap!?!? if you need anything, let me know, i probably have it.

and if you're curious how something comes apart... ive probably got a pic of it ...or two

Rufus · 07-22-2008

I've taken that motor apart more times than I care to remember, but thanks.

NuclearBacon · 07-28-2008

This weekend was finally the defining moment. We buttoned up the final connections, installed the AC back onto its bracket, alternator, and power steering. Hooked up the shifter linkage, Plugged in the wiring harness, re-attached the cruise control, throttle cables, spark plugs, coils, intake, header and battery...

....put some gas in it, and turned the key...

.........didnt start right away, but THEN came to life! Ran GREAT!! smooth idle, and NO CHECK ENGINE LIGHT!!!!!! amazing!!!

so we decide to go up and down the street.... we realize... no speedometer.... BING goes the check engine light. CRAP. We pop the hood, look at the speed sensor, and one of the pins had pulled out. we pushed it back in, go for anothe ride, and the speedo is BACK!

We still have an SRS light, and a Maint. Reqd. Light, but im sure those just need to be reset. The car runs GREAT and is going to be getting a FULL detail job come this week.... Updated pics to come!!!

Keet · 07-31-2008

Wow, very well done. That's something I would never do and probably not be able to do anyways. But totally worth it for you since you know what you're doing. I guess it doesn't even matter if it's a Subaru or a Honda you're working on, the basic principles are the same. Glad to hear she's running fine and everything under the hood is so clean (...for now heh).

NuclearBacon · 08-01-2008

hehe thank you!! yeah at this point, its all engineness... ALL the lights are out now (SRS, Maint Reqd., Check engine) and the car runs great. now it needs a solid vacuuming and detailing. i registered it yesterday at the DMV, and after i run it for abotu 500 miles, i'll go get it smogged. should pass no problem. Someone's going to LOVE this car