6th Gen Honda CivicIn the years from 1996 to 2000 Honda released it's 6th Generation Honda Civic. This Honda Civic had a more aggressive front end and overall body style. It was an instant hit among import tuners.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
I finally picked it up, i got a 93 Delsol SI w/ a 2001 GSR swap ( only 4,500k on motor) AEM intake, exhaust, 11.5 pd wheels, and short shifter.
I can't wait to start workin on it, within the next 2 months I will have JRSC, header, high flow cat, dress up the motor, and hopefully some type r cams.[IMG]i/expressions/face-icon-small-smile.gif[/IMG] [IMG]i/expressions/beer_yum.gif[/IMG]
To remove this ad, register today for free or log in if already registered!
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
thats cool that you are planing on doing something other than the typical bolt ons, but You should check out the N/A forum on Clubsi and double check about ther Type R cams with the JRSC. Someone posted that question about 2 months ago, and people on there were telling the guy to stay away from Type R cams and forced induction. I guess because of the duration and lift, it doesn't match well, although I could be wrong. Do some more research on it as it would be a shame to spend the 600 on the cams themselves not including installation and not make any more power with them. Those cams also make most of there power at the top end, and you need an ECU to remove the rev limiter or at least up it to 8400, retainers springs, and I am not sure a jackson will be creating enough boost at that point.
Long story short, make sure you do enough research on it before doing it....
[IMG]i/expressions/face-icon-small-smile.gif[/IMG] [IMG]i/expressions/beer_yum.gif[/IMG] 
