6th Gen Honda CivicIn the years from 1996 to 2000 Honda released it's 6th Generation Honda Civic. This Honda Civic had a more aggressive front end and overall body style. It was an instant hit among import tuners.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
i doubt it, the mounting is different and so are the connectors, so even if you got ahold of the wire diagrams and spliced wires, it physically would not fit in place like the old one. im not sure how you would get the lcd mileage display to work either.
__________________
Restore Performance, Reduce Costs www.lubecontrol.com
Are you using the new soy based fp-plus?
________________________________________
Go Here For Real Medicine http://www.youngliving.com/
Member 1025782
________________________________________
Jobs wanted in boulder or louisville colorado.
PM me if you know companies that are hiring.
Thats what I have, they are ok...not nearly as good as the picture. I wouldn't mind selling you mine if your still interested for a bit cheaper. Just PM me. I'm in the process of trying to buy my friends accord so I wont be needing them.
__________________ New Ride:
2k1 EM2 Coupe EX 5 Speed
Current Project:
CarPC
Xenarc 700TS 7" Touchscreen
1.2Ghz Celeron
Asus Mobo
512mb Memory
120GB HD
150wat PS
Custom Built Startup/Shutdown Controller
Well here is a little rebirth, I pulled out my old diagrams and figured out how I had everything hooked up. If anyone has any ideas on how to get the Gear position to work that would be great. Still again the temp gauge will no work.
__________________ New Ride:
2k1 EM2 Coupe EX 5 Speed
Current Project:
CarPC
Xenarc 700TS 7" Touchscreen
1.2Ghz Celeron
Asus Mobo
512mb Memory
120GB HD
150wat PS
Custom Built Startup/Shutdown Controller
Well like I said the fuel gauge is off a bit so you would have to figure out where its empty with your actual tank, but one it warms up a little and I can get back outside I'm going to see if putting a resistor in the line before it goes into the gauge will make the gauge read any lower to get it closer. Fitting will be tricky, If you cut the two bottom tabs then it should go in pretty good its just the bezel that your going to have to figure out cause the one for our car does not fit the cluster nor will the 03-05 bezel fit in our dash. Also here is an updated diagram I forgot to put the second ground wire on it.
__________________ New Ride:
2k1 EM2 Coupe EX 5 Speed
Current Project:
CarPC
Xenarc 700TS 7" Touchscreen
1.2Ghz Celeron
Asus Mobo
512mb Memory
120GB HD
150wat PS
Custom Built Startup/Shutdown Controller
Alright hooked up a few things today. I just tapped into the wires of my current cluster and ran them from the dash so the new dash it just sitting in my seat right now. Only thing I have hooked up is power,ground,tach,spedo,and fuel. I'm uploading video now so hopefully it will be done by the time I go into work if not I'll post them later tonight.
__________________ New Ride:
2k1 EM2 Coupe EX 5 Speed
Current Project:
CarPC
Xenarc 700TS 7" Touchscreen
1.2Ghz Celeron
Asus Mobo
512mb Memory
120GB HD
150wat PS
Custom Built Startup/Shutdown Controller
