VTEC failure!!!
#1
Registered!!
Thread Starter
Join Date: Dec 2016
Age: 26
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 VTEC failure!!!
Hi guys/girls, I need some help diagnosing why VTEC won't kick in. I have a p0600 code and camshaft position sensor code on bank A. I cleaned the VTEC solenoid and its still not hitting. Any opinions or help of any kind will be greatly appreciated. It has a slight tune to bump stock rev limiter to 8500 rpm. Its not kicking in at 6000 like it should and hits red line at 7800 now and acting boggy.
#2
If you think a good mechanic is expensive, try hiring a bad one
Re: VTEC failure!!!
NO VTEC code at all? Then it shouldn't be a VTEC problem.
Fix the other codes first and see what happens.
What car do you have?
Fix the other codes first and see what happens.
What car do you have?
#3
If you think a good mechanic is expensive, try hiring a bad one
Re: VTEC failure!!!
Oh wait....EP3 = hatch with K20 engine........raised the rev limiter (DOH!)......cam code......what's the exact fault code number? I bet the chain has jumped time.
#5
If you think a good mechanic is expensive, try hiring a bad one