Tips on replacing Clutch Master Cylinder
#1
Registered!!
Thread Starter
Join Date: Apr 2014
Location: Hampton Roads, Virginia
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 125 Tips on replacing Clutch Master Cylinder
Anyone have a tip or photo for how to get the clutch master cylinder?
I removed the pedal pin and the two bolts but its almost impossible to get down at the MC to remove the fluid line...
I removed the pedal pin and the two bolts but its almost impossible to get down at the MC to remove the fluid line...
#3
Registered!!
Thread Starter
Join Date: Apr 2014
Location: Hampton Roads, Virginia
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 125 Re: Tips on replacing Clutch Master Cylinder
Thanks, that did it.
There is a shroud in front of the clutch master cylinder but you can reach around it with the wheel off.
New Master and Slave cylinders installed. It feels much better and the low volume squeak is gone!
There is a shroud in front of the clutch master cylinder but you can reach around it with the wheel off.
New Master and Slave cylinders installed. It feels much better and the low volume squeak is gone!
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
sysblack
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
05-13-2015 08:55 PM
thesushiboy
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
04-12-2015 02:54 AM