Help With Camber Kit for my em2
#1
Registered!!
Thread Starter
Join Date: Jan 2013
Location: Texas
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Help With Camber Kit for my em2
ive been told i have to buy camber bolts, im buying ksport rear camber kit im planning on dropping my civic 3 inches help please
#6
Registered!!
iTrader: (5)
Join Date: Sep 2003
Location: San Antonio
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 252 Re: Help With Camber Kit for my em2
Definite yes on the cam bolts but they might not be enough if your gonna drop it 3 inches you still might get some tire lean.. im at 2 inches and the cam bolts barely corrected the lean.
#8
Registered!!
iTrader: (5)
Join Date: Sep 2003
Location: San Antonio
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 252 Re: Help With Camber Kit for my em2
http://www.summitracing.com/parts/sp...02/submodel/ex
Im just guessing you have either an 01-02.. civic and yes you need them
Im just guessing you have either an 01-02.. civic and yes you need them
#11
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 Re: Help With Camber Kit for my em2
02 uses 14mm, if that's the question.
if you use 16mm, you need to drill out the knuckles for them to fit.
3 in and that means your rear camber kit will not be enough to have them close to zero, if memory serves me well, so you need to compensate by increasing the front neg camber?
if you use 16mm, you need to drill out the knuckles for them to fit.
3 in and that means your rear camber kit will not be enough to have them close to zero, if memory serves me well, so you need to compensate by increasing the front neg camber?
#12
Registered!!
Thread Starter
Join Date: Jan 2013
Location: Texas
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: Help With Camber Kit for my em2
Ohhkau if anyone can help me get all the parts to slam it whiteout camber please put the parts I have the ep3 coilovers racelands
#13
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 Re: Help With Camber Kit for my em2
ep3? you will need the reducer washers to install on your knuckles
#15
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 Re: Help With Camber Kit for my em2
no, the struts have a hole bigger than the bolts, so you either use the reducing washers or drill out the knuckles and install the larger bolts. search the site for reducer washers and you will understand what I mean.
#17
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,780
Received 1,440 Likes
on
1,196 Posts
Rep Power: 338 Re: Help With Camber Kit for my em2
#25
Prelude Owner
iTrader: (7)
Re: Help With Camber Kit for my em2
Your going to need DC5 tie rod ends also. The bushing on the rear struts May also have to be shaved down a couple mm to fit. Don't know if the shop will do that, might want to ask just incase they do.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Dave Brabant
6th Generation Civic 1996 - 2000
20
10-06-2015 12:44 AM
Hutch1051
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
09-29-2015 09:20 AM
beanhead
Archive - Vehicles for Sale/Wanted
1
09-24-2015 12:04 PM