krayfraternity

I would like to know if I do want to put yellow jdm lights after cutting and installing everything.. Where do I connect the wires if I want them to turn on when I turn on my lights during the night?

mikey1

if you only want them on when you turn your headlights on, then you wire them into the headlight circuit (low beam).....or you could wire them into the DRL if you want them on all the time

TFMEX

where did you get the fog lights? The harness, depending on how its constructed, can either tap into a 12v source giving you the control to just turn them on or off as you please.

The other way is to have them plug into the DRL socket to power the switch and the fog light power socket (both which are located under the steering column in the car). That allows you to have control of the lights when you turn the headlights on.

Go to the DIY section and look at the ebay fogs lights thread. is shows you everything.

krayfraternity

What does DIY stand for?

Kennykid2002

iTrader: (1)

Do it yourself