General Honda Civic ForumGeneral Honda Civic Forum - This is the place for general Honda Civic discussion. If you have questions about the history or future of Honda Civics, factory specs for the Honda Civic, or other general Honda Civic Questions.
Welcome to civicforums.com!
Welcome to civicforums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
Ok I started a project to insert Speed Glow to my Cluster. I spliced into two wires one power one ground. However now my RPM need does not work at all and the Speed Glow lights only work when the Headlights are on and the Engine is off. Once I turn on the car and power up the Engine the Speed Glow lights turn off and the RPM needle doesnt budge. I know power runs into the wires I spliced but I need to know how to fix the problem so power is returned to the wires when the Engine is on.
I have already disconnected the Speed Glow from the wires I spleced but power is still not being directed through when the Engine is on.
To remove this ad, register today for free or log in if already registered!
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
