fatboy

OK, I have searched for hours with no luck. I already have the mirrors mounted, all I need is to hook up the wires. The M3 mirrors came with the following:

Motor (3 wires bundled together):
BLACK
WHITE
RED

LED (3 wires bundled together):
i forget the colors (will post/edit later)

anyways, I tried every possible combo (for the moor part at least) and it is always that I can either move the mirror either side to side, or up and down (but not at the same time). There are 3 wires coming from the door on the original harness. If ANYBODY has M3 power mirrors, PLEASE pop off the tweeter pod and tell me how it is hooked up. THANK YOU!

Fletch

i ran into the same problem with mine, and i ended up just trying different combinations until i got the mirrors to have all their original functions. Unfortantly when i push left or right the mirrors go up and down and when i push up and down they go left or right. but other than that everything is ok :-)

jeffsta17

iTrader: (9)

Get a wiring diagram...I think there is one on this site but then just look up power mirrors and it should tell you which wires do what

fatboy

you guys suck. i ended up adjusting them manually. I hooked up the LED though. looks tight