You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join civicforums.com today!
got new fogs and installed, but dont knoe why the lights wont come on.
i don't know why they won't turn on either...just check all of your wiring all over again. that happend to me and it turned out i forgot to connect a small wire that lead into the car from the engine bay
To remove this ad, register today for free or log in if already registered!
Sponsored Links
To avoid seeing this ad in our forum please register at CivicForums.com
By joining our free community you will have access to post topics, respond to polls, upload content and access many other special features.
want to know, i got my fogs off ebay and the 2 plug that plugs to the fuse box right under the steering wheel, the plugs are brown with white wire and grey plug with red/black wire so is it suppose to be like that or the other way around cause my fogs dont even work.
so ok from reading mostly this whole thread the oem housing beam pattern is much better than the oem replicas?
and there is a way to wire it so that when i push the button the fog lights come on whenever i want them to with the push of the button? and if so can i get the person who can do this to help me out? (sorry looked through alot of the post and cant find it...im blind)
and i have a 02 sedan, BUT its an ex so i dont think i would have any empty slots on the part of the car where the cruise control button and such is at. so my only place to put it is thopse slots near the cig lighter hole thing. so my question is....by getting the oem replicas, and getting the oem 02 fog light switch, would i have to rewire the wiring so that it would work with the oem 02 fog switch and so i can make it so that the fog lights come on whenever i push that button?
sorry guys i didnt read this throughly so i am missing some key points that you guys have already discusses. so just help a noob out......and also im planning to get either the oem fog lights from the dealship or the oem replicas from rob(robearacing.com) but i want to have them wired so that they can turn on whenever i push the fog light button and also i want something that would show the light good because there has been some heavy fog lately around my area and i BADLY need these fog lights with the yellow light in them from impulse's idea. thanks
^^^ YEA dont worry about it.... U and me both are in the same boat, only I just got my oem style's and they are in, the only thing that is not in is the internal wiring harness and switch, SOOOooo they are in, just not working :-(
Did anyone have trouble w/ the replica switch they gave u. I got the ebay fogs too and the switch wont fit in the knock out holes by the 12v outlet. ? Other than that the install was pretty easy.
__________________ "I like anything fast enough to do something stupid in" -XXX
The average blue whale produces over 400 gallons of sperm when it ejaculates, but only 10% of that actually makes it to his mate. So, 360 gallons are spilled into the ocean every time one unloads . . . and we wonder why the ocean is so salty. Try not to swallow the water!!!!
Nitrous is like a hot chick with STDs; you wanna hit it but you are afraid of the consequences
...i LOVE it! 
