[RaulDelgado]

I know the DIY on this site shows how to remove the bumber. But, is it required that I remove the front bumper on my 2k3 EX to remove the headlight assembly?
I've never seen anyone clear their headlights before and am thinking of doing it.

Thanks,
RD

[armieo]

yes man you gotta. It's easy all you need to do is pop off the 4 tabs under the hood, the 6 tabs under the bottom of the bumper, and unscrew the two screws in the wheel wells and two screws under the bumper. Took me and my friend a record 2 minutes.

[RSXtypeIvtec]

i never completely took off the front bumper, just took off the 2 screws on each side by the wheel well, and pop the 4 clips under the hood.....that was enough room for me to get the lights out

[robbclark1]

yes all you have to do is remove the top screws and scoot it forward.

[FALKEN]

taking the cover off is easy and it also makes the job easier imo

[ImPulse]

we need a "Light" forum...

[FALKEN]

Originally posted by ImPulse
we need a "Light" forum...

your wish has been granted

[Voiceofid]

yes, remove the bumper will make life easier

and after you do it enough times, it will become second nature, it takes me about 3 minutes to remove my front bumper